On this page
- Exploded Views for Boards and Pitches, Not for the Workshop
- All Exploded Views at a Glance
- Exploded Axonometric From a Building Render
- Exploded Axonometric From a SketchUp View: Pass
- Exploded View of a Chair: One Slip, Then a Pass
- Exploded View of a Product: Speaker Parts on One Axis
- What It Can't Do
- How to Make an Exploded View From Your Own Render
- Frequently Asked Questions
- For the Board and the Pitch, Not the Workshop
An exploded view pulls an object apart along one axis so you can see every part and where it goes. For architects it is the exploded axonometric on a competition board; for product and furniture designers it is the exploded diagram on a launch page or a pitch deck. We gave Visualizee one photoreal building render, one SketchUp-style model view and two product shots, and asked for both kinds. The building diagrams held every floor and window. The speaker came apart into eight clean parts. The chair lost its back legs on the first try, and none of it is an assembly drawing: all below, with the input next to every output.
Quick answer: Upload the render, model view or product shot, count the floors or parts first, and ask for an exploded view "along one vertical axis with equal gaps" that names every layer or part and keeps those counts. Use high quality. Then check the counts and the joints yourself: the model draws what you name, invents what the input can't show, and adds no dimensions you can trust.
Exploded Views for Boards and Pitches, Not for the Workshop
An AI exploded view is a presentation drawing. It shows a jury, a client or a buyer how something is put together. It is not a drawing anyone builds from.
On a competition board, that is exactly the job. ArchDaily's guide to competition board layout calls the exploded view a resource "frequently used in board layouts" because it illustrates "the chosen construction methods, materials, spaces, and circulation flows", and reminds entrants that board drawings "are not working drawings".
Product drawings are where the line matters. Iowa State's mechanical engineering course text on engineering drawings shows an exploded view with numbered part balloons next to an assembly drawing with a bill of materials, and calls dimensions and tolerances "the most important and most complicated part of the drawing". The images below carry none of that.
All Exploded Views at a Glance
Eight of the nine exploded views passed, three with a smaller error worth knowing. Every one was a high quality render at 200 credits; the four inputs are in the totals below the table.
| Exploded view | Made from | Time | Result |
|---|---|---|---|
| Exploded axonometric | Building render | 96.0 s | Pass |
| Competition board restyle | Exploded axonometric | 97.1 s | Pass |
| Facade layers | Building render | 98.3 s | Pass (columns drawn twice) |
| Exploded axonometric | SketchUp view | 102.5 s | Pass (terraces cut with the floor above) |
| Chair, try 1 | Chair photo | 107.9 s | Slip: back legs cut short |
| Chair, try 2 | Chair photo | 97.3 s | Pass |
| Chair assembly sheet | Chair, try 2 | 94.7 s | Pass (24 dowels right, joints mixed) |
| Speaker exploded view | Speaker photo | 77.3 s | Pass (inside parts invented) |
| Speaker callouts and parts list | Speaker exploded view | 80.7 s | Pass (the list is ours) |
With the four inputs (86.1, 58.1 and 72.1 s at high quality, 37.4 s for the everyday SketchUp view), the set took 13 renders and 2,520 credits, about $5.24 on the $40 Pro plan. High quality costs 200 credits against 120 for everyday; for thin dashed lines and part counts it is worth it.
Exploded Axonometric From a Building Render
One photoreal render was enough for a clean exploded axonometric, a coloured board version and a facade explode, with every floor and window in place. All three passed; the facade one has a drawing error worth a look.
The building is a three-storey community library: a glazed ground floor, two upper floors in vertical oak fins with five tall windows on the front and three on the side, pale concrete slab edges and a glass pavilion on the right half of the roof. It is a generated render, so there is no real building or client behind it.

The exploded axonometric: pass
The model pulled the building apart on one vertical axis, with dashed lines at the corners: the glazed ground floor, the first floor walls, a floor slab, the second floor walls, the roof slab and the pavilion. Both upper floors kept five front windows and three side windows, and the entrance and pavilion stayed where the render has them.

The words we said to Vizzy, in plain language: "Turn this library into an exploded axonometric for a competition board, seen from above the front-left corner on white. Pull it apart on one vertical axis with equal gaps: the ground floor, each floor slab, each upper floor, the roof and the rooftop pavilion. Dashed lines at the corners. Keep three storeys, five windows per upper floor on the front and three on the side. No text, no people."
We asked for seven layers and got six: the ground floor and the first floor slab came out as one piece. On a board nobody counts slabs, but if your diagram is about the structure, name the layer you want separated twice.
Competition board restyle: pass
From the exploded axonometric, not from the render, we asked for the white-model look boards often use, with one colour per floor for the programme: terracotta for the public ground floor, ochre for the reading rooms, sage for study rooms and blue for the event pavilion. Every layer, gap and window stayed put.

The words: "Restyle this as a white model with crisp black edges, and colour each floor by its use: ground floor terracotta, first floor ochre, second floor sage, pavilion light blue. Keep every layer, gap, dashed line and window exactly where it is. No text." Add the legend in your layout tool, where you control the spelling.
Facade layers: pass, with the columns drawn twice
An exploded axonometric can also peel a facade forward. Asked for three layers from back to front (the concrete frame, the glazing, the oak fin screen), the model drew all three, with five window openings per floor in the fins and the entrance in the glazed ground floor.

Look behind the glass, though: the round columns appear in the glazing layer as well as in the frame. Each column exists twice. It reads fine at board size; a juror zooming in on structure will see it.
Exploded Axonometric From a SketchUp View: Pass
A massing model works the same way. The input is a plain SketchUp-style screenshot of a four-storey stepped block: four boxes, each set back to make a terrace, four windows per floor and railings on three terraces.

All four floors, all 16 windows and every setback came back. One choice changed: we asked for each terrace to stay on top of the floor below, and the model cut it with the floor above instead, so each upper box carries its own terrace slab and railing. Both are valid ways to explode a stepped building; just check it is the one your diagram is about. For the flat drawings from a SketchUp view, see elevation drawings from one render.
Exploded View of a Chair: One Slip, Then a Pass
A furniture exploded view has to keep how the parts join, and that is where our one real slip happened. The input is a studio shot of an oak dining chair: the two back legs run up into the backrest as long posts, plus four seat rails, four low stretchers, three back slats and a curved top rail.
Try 1: the back legs cut short (slip)
The first exploded view kept every count we named (four legs, four stretchers, three slats, one top rail) and changed the chair. All four legs came back short and equal, so the backrest floats above the seat on three slats with nothing holding it. That chair can't stand up as drawn.

Our prompt caused it: it listed "the four legs" as one kind of part, and the model drew four of the same. This is the slip to watch on any furniture exploded view: the counts are right and the construction is wrong.
Try 2: back posts named (pass)
The fix was to describe the construction, not just the count: two long back posts that hold the top rail, two short front legs. The second try kept the posts whole, lifted the top rail and slats off them, and pulled the seat rails and stretchers out from the legs with dashed lines at each joint.

The words that fixed it: "Explode this chair on one vertical axis with even gaps. The two back legs are single long pieces from the floor to the backrest that hold the top rail; keep them long and the front legs short. Keep two back posts, two front legs, four seat rails, four stretchers, three slats and one top rail, the same oak and wool. Dashed lines at the joints. No screws, no text."
Assembly sheet with dowels: counts right, joints mixed
From the corrected chair we asked for a black-and-white assembly sheet with exactly two dowels at each end of each seat rail and one at each end of each stretcher. Counted on the full-size image: 16 and 8, all 24 right.

A woodworker would still not build from it. The legs have rectangular mortise slots, the front rail has tenons at both ends, and round dowels float in front of all of them: three joint types on one joint. It looks like an instruction sheet and isn't one.
Exploded View of a Product: Speaker Parts on One Axis
A product exploded view sells what's inside, and the inside is the part the photo can't show. The input is a studio shot of a portable speaker with a sage fabric grille, a graphite top cap with three buttons and a carry loop. "Quorrel" is an invented brand.
Photoreal exploded view: pass
We named eight parts, top to bottom, and got eight on one vertical axis, evenly spaced: the top cap with minus, play and plus buttons, a circuit board, a passive radiator, the driver, a battery, the inner enclosure, the grille sleeve with its loop and wordmark, and the base ring. The colours and the "Quorrel" spelling held.

The words: "Explode this speaker on one vertical axis with even gaps, top to bottom: the top cap with its three buttons, a thin circuit board, a passive radiator, the driver facing up, a battery, the inner enclosure, the fabric grille sleeve with the loop, the base ring. Keep the colours and the Quorrel wordmark spelled exactly. No other text."
Everything between the cap and the base is a plausible invention. For a product that exists, give the model your own photos of the parts or your CAD screenshot, and treat the result as an illustration of them.
Callouts and a parts list: pass, because we wrote the list
As a black-and-white spec drawing, it added numbered balloons 1 to 8 and a parts list table, all spelled right. That is the part to be careful with.

Every entry in that table is one we typed. The model numbered what it was told to number. A real speaker also has screws, cables, gaskets and a charging port board, and the drawing doesn't miss them, because it doesn't know they exist.
What It Can't Do
These are pictures of exploded views. They show how a design goes together in a way a jury or a buyer understands, and nothing more.
- It is not an assembly drawing or a bill of materials. No dimensions, no tolerances, no part numbers you can order. A parts list it draws is the one you typed, and it won't tell you a part is missing.
- Counts can be right while the construction is wrong. The first chair kept every count and lost its back legs. Check how parts join, not just how many there are.
- What the input can't show is invented. The speaker's insides, the rooms behind the library glass and the back of anything are plausible guesses.
- Joints and structure are drawn, not engineered. Mixed dowels and mortises, columns that exist twice, a slab merged into a floor. Fine at board size, wrong in a detail.
- Not to scale. Gaps, part sizes and floor heights are drawn by eye. As the elevation drawings test showed, numbers the model writes on a drawing are invented, and the drawing under them has no single scale.
How to Make an Exploded View From Your Own Render
Count first, name every layer or part in order, and say how the tricky parts join. That was the whole difference between the two chairs.
- Upload one clean input: a render or model screenshot of the building from a corner, or a product shot from three-quarter view on a plain background.
- Count before you ask: storeys and windows per floor, or legs, rails and slats, or buttons. Put the counts in the request.
- Name the layers or parts in order, top to bottom or back to front, and ask for "one axis, equal gaps, dashed alignment lines".
- Describe any part that isn't like the others: long back posts, a cantilever, a slab that belongs to the floor above.
- Use high quality for line work and part counts.
- Restyle from the exploded view, not from the input: the board colours and the line drawing kept the layout because they started from it.
- Add text in your layout tool: legends, titles and part numbers you control.
If the job is a full set of flat drawings, the elevation drawings post makes elevations, a section and a blueprint sheet from one render. The October one house photo, 12 outputs test has a quicker exploded house from a front photo, and the presentation set workflow makes matching photoreal views from one sketch. Every limit we found across AI rendering is on the AI rendering guide.
Frequently Asked Questions
Can AI make an exploded axonometric from a render?
Yes, as a presentation diagram. From one photoreal render of a three-storey library, Visualizee pulled the ground floor, both upper floors, the floor slabs, the roof and the rooftop pavilion apart on one vertical axis in 96 seconds, with five windows per upper floor on the front and three on the side, exactly as in the render. The same diagram restyled as a white model with one colour per floor passed too.
Can AI make an exploded view of a product from a photo?
Yes, for a launch page or a pitch. From one studio shot of a speaker it drew eight parts on one axis, from the top cap with its three buttons down to the base ring, with the invented brand name spelled right. The parts inside are invented: a photo of the outside shows none of them, so treat the inside as an illustration, not a teardown.
Is an AI exploded view an assembly drawing or a bill of materials?
No. An assembly drawing carries dimensions and tolerances and a parts list that matches the real product. An AI exploded view has no measurements, and its part list is whatever you typed: we gave it eight part names and it numbered eight parts. It will not tell you a part is missing, and a real speaker has screws, cables and gaskets this one does not show.
What went wrong in the test?
The first exploded chair cut the two back legs short, as if the chair had four equal legs, so the backrest floated on three slats with nothing holding it. Naming the back legs as long back posts fixed it on the second try. Other drawings had smaller errors: columns drawn twice in the facade diagram, and round dowels next to rectangular mortises in the assembly sheet.
Does it work from a SketchUp screenshot?
Yes. From a plain SketchUp-style view of a four-storey stepped block, the exploded axonometric kept four floors, four windows per floor and every setback. It cut the terraces with the floor above instead of the floor below, which is a valid way to draw it but not the one we asked for.
How much does it cost?
We used high quality for every exploded view because thin lines and part counts are where faster renders slip: 200 credits each, about $0.42 on the $40 Pro plan, and 58 to 108 seconds a render. All 13 renders in this post, including the four inputs, cost 2,520 credits, about $5.24. You can try it free on your own render or product photo.
For the Board and the Pitch, Not the Workshop
One render was enough for an exploded axonometric, a coloured board diagram and a facade explode; one product shot was enough for a chair and a speaker pulled apart on one axis. Counts held when we named them, and construction held only when we described it. Keep these on the board, the launch page and the pitch deck, and let your CAD model make the assembly drawing.
Try it on your own render. Upload a building render, a SketchUp view or a product shot and ask Vizzy for an exploded view: try Visualizee free, no card.
Render your project tonight. From a screenshot.
Bring a SketchUp, Revit or ArchiCAD view or a sketch. Vizzy keeps your design and adds the materials and light you describe.


Sign in with Google, Apple or email. No credit card.









