BlogIndustries

Restaurant Renderings From an Empty Unit: Three Concepts for Investors and the Landlord

One empty restaurant unit as a bistro, a cocktail bar and a counter spot, 23-35 s a render, shopfront and columns kept, plus three fascias. What slipped.

Try it free

Piotr Obidowski9 mins read

Restaurant Renderings From an Empty Unit: Three Concepts for Investors and the Landlord
On this page
  1. Why Show Investors and the Landlord a Concept First
  2. The Inputs: One Empty Unit, Inside and From the Street
  3. All Renders at a Glance
  4. One Empty Unit, Three Concepts
  5. The Same Bar After Dark
  6. The Storefront and the Name on the Fascia
  7. Seat Counts Are Not a Layout
  8. What It Can't Do
  9. The Words You Say to Vizzy
  10. How to Make a Concept Set for Investors and the Landlord
  11. Frequently Asked Questions
  12. One Empty Unit, Three Directions

Restaurant renderings are how a restaurateur, a hospitality designer or a broker shows investors and a landlord what an empty unit could become before anyone signs a lease or a cheque. We took one photo of a vacant ground-floor unit and asked Visualizee for the same space as a neighbourhood bistro, a cocktail bar and a fast-casual counter, with the shopfront, columns, ceiling and camera kept, then put each concept's name on the fascia. Each concept took 23 to 27 seconds. Below are the photos, the words we typed, the times and credits, and what it can't show.

Quick answer: Photograph the empty unit once from a back corner, shopfront and ceiling in frame, and the street front once from across the road. Ask for one concept per request with a keep list: camera, shopfront and door, columns, ceiling, duct, walls. Make the night shot and the fascia from those. Don't use the render for seat counts, kitchen extraction, fire limits, licensing or fit-out cost.

Why Show Investors and the Landlord a Concept First

An investor backs a picture of the room as much as a spreadsheet, and a landlord picks a tenant partly on what the unit will look like from the street. A bare shell with a concrete floor shows neither. Three concept renderings on the actual unit let both sides react to a direction before the design fee is spent.

The landlord looks at different things than the investor. They want to know the shopfront stays, nothing is cut into the columns, the fascia fits the building, and the use is one they will allow next to their other tenants. So the job here is the same as with a vacant office floor: change the room, keep the building.

The Inputs: One Empty Unit, Inside and From the Street

The interior input is one wide photo from the back corner at eye level, looking toward the street: a polished concrete floor, a 4.5 m concrete ceiling with a spiral duct and red sprinkler pipes, two square concrete columns, a brick wall on the left, a white wall on the right with an electrical panel, and a full-width shopfront with the entrance door on the right. The street input is the same kind of unit from across the road, under a blank grey fascia in a four-storey brick building.

Both are generated photos standing in for yours (high quality, 84 and 74 seconds, 200 credits each), so no real building is shown. Because they were generated separately, they don't match each other exactly: the interior has five glass panes, the street photo three. Photograph your own unit twice, inside and out, and they will.

Two panels: an empty ground-floor commercial unit seen from the back corner, with a polished concrete floor, exposed concrete ceiling with a spiral duct and red sprinkler pipes, two square concrete columns, a red brick wall on the left and a glass shopfront with the entrance door on the right; and the street front of an empty unit under a blank grey fascia in a four-storey red brick building

All Renders at a Glance

Nine edits from two photos: eight passed and one slipped. Every concept kept the shopfront, the door, both columns, the duct and the ceiling where they were; the slip is a seating layout. The open kitchen passed as a render but shows the biggest thing a render leaves out.

RenderInputWhat we asked forTimeCreditsVerdict
Empty unit photoText onlyShell, two columns, glass shopfront84 s200Accepted
BistroEmpty unitGreen banquette, marble tables, zinc bar27 s120Pass
Cocktail barEmpty unitWalnut bar, velvet booths, charcoal walls27 s120Pass
Fast-casual counterEmpty unitTiled counter, communal table, ledge23 s120Pass
Bar at nightCocktail barNight outside, lamps up, nothing moves31 s120Pass
40 seatsEmpty unitTen tables of four in two rows of five23 s120Slip: three rows
Open kitchenEmpty unitPass counter, wood-fired oven, hood34 s120Pass
Street photoText onlyBrick building, blank fascia, empty unit74 s200Accepted
Corvelle fasciaStreet photoGreen fascia, cream serif name, curtains35 s120Pass
Tallowmere fasciaStreet photoBlack fascia, halo-lit brass name, dusk27 s120Pass
Ferngrain fasciaStreet photoWhite fascia, terracotta name, awning24 s120Pass

All 11 renders were 1,480 credits, about $3.08 on the $40 Pro plan; one everyday render is 120 credits, about $0.25.

One Empty Unit, Three Concepts

From the same photo, three requests gave three directions, and all three passed. The shopfront mullions, the entrance door, both columns, the spiral duct and the sprinkler pipes sit in the same place in every one. What changed is everything an investor is choosing between: the floor, the furniture, the bar, the light and the mood.

Four panels of the same restaurant unit: empty with a concrete floor; a bistro with a green leather banquette along the brick wall, marble tables, bentwood chairs, globe pendants and a zinc bar; a cocktail bar with oxblood velvet booths, a curved walnut bar with leather stools and charcoal walls; and a fast-casual spot with a white tiled ordering counter, a long ash communal table and a ledge along the brick wall

What we typed for the bistro: "This is a concept rendering of the empty restaurant unit in the reference photo, fitted out as a neighbourhood bistro. Keep exactly: the camera position, lens and framing; the shopfront with its glass panes, dark aluminium frames and the glass entrance door on the right, and the street view outside; the two square concrete columns, their positions, size and raw finish; the exposed concrete ceiling height, the spiral duct, the red sprinkler pipes; the exposed red brick left wall; the white right wall and its position. Do not move, add, remove or resize any of those. Change only: a long dark green leather banquette along the brick wall with small marble bistro tables and bentwood chairs, more two-seat tables in the middle of the room, a short zinc-topped bar with a back shelf of wine bottles against the right wall, warm globe pendant lights hanging from the ceiling, a warm oak floor, linen café curtains on brass rails across the lower half of the shopfront glass. Same soft overcast daylight. No people, no text, no logos."

We reused the keep list word for word for the bar and the counter. A difference image of the empty photo against the bistro and the counter shows what it buys: white marks only the new furniture, floor and light fittings; the mullions, door, columns and duct stay black.

Four panels: the empty unit, the bistro render, and two black-and-white difference images against the empty unit for the bistro and the counter concepts, where only the new furniture and fittings show white and the shopfront, columns and duct stay black

One caution on the counter concept. The ordering counter runs along the right wall right up to the entrance door, so the queue would form in the doorway. The render draws what you ask for; it doesn't check how people move through the room.

The Same Bar After Dark

A bar is sold on how it feels at nine at night, so we made the night version from the accepted cocktail bar, changing only the light. It passed: dark street, lit windows across the road, the sconces and back bar glowing, and every booth, stool and chair where it was. Make night shots from the render you've accepted, not from the empty photo, or you'll get a different bar.

Two panels of the same cocktail bar: in overcast daylight with a grey street outside, and at night with a dark street, lit windows opposite, glowing sconces and candles and the back bar lit, with the furniture in the same place

The Storefront and the Name on the Fascia

The landlord sees the unit from the street, so each concept also got a fascia: the colour, the name letter for letter, and what shows through the glass. All three passed, and all three names came back spelled correctly. The brick building, every upper window, the shopfront frames, the tree and the parking meter stayed where they were.

Four panels of the same street front: the empty unit under a blank grey fascia; CORVELLE in cream serif letters on a bottle green fascia with café curtains; TALLOWMERE in halo-lit brass letters on a black fascia at dusk with a warm bar inside; and FERNGRAIN in terracotta letters on a white fascia with a striped awning and a bright counter restaurant inside

For the bar we asked for halo-lit letters: "the letters halo-lit with a soft warm glow on the black board behind them while the letter faces themselves stay dark brass and do not glow". That is how it came back. The same wording fixed the night sign in our storefront sign mockup test. The upper windows changed too, warmly lit with curtains, because we asked for lit windows upstairs; if the flats above are someone else's, don't dress them.

A close crop of the black fascia with TALLOWMERE in slim brass capitals, the letter faces dark and a warm glow on the board behind each letter

Corvelle, Tallowmere and Ferngrain are invented names; a web search found no restaurant or bar with any of them. Put your real logo on afterwards if the brand matters, because the model draws a typeface, not yours.

Seat Counts Are Not a Layout

A render cannot tell an investor how many covers the unit seats. Asked for exactly 40 seats as ten tables of four in two rows of five, the render drew three rows of tables, with some partly behind the columns. We count 11 or 12 tables, and we couldn't count the chairs honestly.

Two panels: the empty unit, and the 40-seat bistro render with three rows of square tables and bentwood chairs numbered 1, 2 and 3 in red where two rows were asked for

Covers drive the whole business plan, so they need a scaled layout. The legal ceiling is a separate number again: the International Building Code allows one occupant per 15 square feet of net floor area for assembly space with tables and chairs, and one per 5 for standing space (IBC 2021, Table 1004.5). Your local code and the official who reviews it decide; a picture doesn't.

What It Can't Do

It shows what the unit could look like; it does not plan, price, license or permit a restaurant. These are the limits we hit and the ones an investor or a landlord will raise.

  • It doesn't show kitchen extraction. Asked for an open kitchen with a wood-fired oven, the render drew a convincing stainless hood that rises into a box and stops at the ceiling. Where the exhaust goes after that, through the slab and up the building to the roof, is not in the picture. Commercial kitchen ventilation and fire protection have their own standard, NFPA 96, and in an existing building the duct route is often what the landlord decides on.
  • It doesn't show fire or occupancy limits. Exits, travel distances, accessible routes and the occupant load don't exist in the image. The seat count above moved on the first try.
  • It doesn't show licensing. A bar in a render is not a bar with a liquor licence, extended hours or a change of use. Those depend on your local authority.
  • It doesn't show fit-out cost. A walnut bar, a velvet booth and a painted wall look equally easy. The budget comes from your contractor and kitchen designer.
  • It doesn't check circulation. The counter concept put the queue in the doorway. The render follows your words, not a plan.
  • Anything it adds is an added promise. Plants, candles and lit flats upstairs came in the pictures. If they won't come with the unit, say so.

Two panels: the open kitchen concept with a red ellipse where the stainless steel hood enclosure meets the concrete ceiling, and a close crop of the same hood, the wood-fired oven and the pass counter

The Words You Say to Vizzy

In the app you don't need the long requests above. Upload the photo of the empty unit and tell Vizzy what you'd tell a designer: "Show this empty unit as a neighbourhood bistro: green banquette on the brick wall, marble tables, a small zinc bar on the right. Keep the shopfront, the door, both columns, the ceiling and the camera exactly as they are." Vizzy turns that into a full keep list and a render request; read it before you render.

For the next direction, start from the empty photo again, not from the bistro: "Same empty unit, this time a cocktail bar: curved walnut bar on the right, velvet booths on the brick wall, dark walls." For the evening shot: "Same bar at night, lights up, nothing else moves." For the street: upload the street photo and say "Paint the fascia black and put TALLOWMERE on it in brass letters, halo-lit, letter for letter."

How to Make a Concept Set for Investors and the Landlord

One photo per view, one concept per request, the empty photo next to every render. Every render in this test followed these steps.

  1. Shoot the unit empty from a back corner at eye level, ceiling and shopfront in frame. Shoot the street front from across the road.
  2. Write the keep list once (camera, shopfront and door, columns, ceiling, duct, walls) and paste it into every request.
  3. Ask for one concept at a time, each from the empty photo, not from another concept.
  4. Make the night shot from the concept you've accepted, changing only the light.
  5. Put the name on the fascia from the street photo, letter for letter, and swap in the real logo later.
  6. Compare with the input: mullions, door, columns and duct. A quick overlay in any image editor will do.
  7. Label the set: "Concept rendering, not a design", with the empty photos, the layout and the budget kept separate from the pictures.

The furnish an empty room walkthrough shows the same steps recorded in the app, and the AI rendering guide covers what it does well and badly in general.

Frequently Asked Questions

How do I make restaurant renderings from a photo of an empty unit?

Take one wide photo of the empty unit from a back corner, with the shopfront, columns and ceiling in frame. Upload it and ask for one concept at a time with a keep list: camera, shopfront and door, columns, ceiling, duct and pipes, side walls. In our test each concept took 23 to 27 seconds at everyday quality (120 credits, about $0.25 on the $40 Pro plan), and the shopfront, columns and ceiling stayed in place in every concept.

Can a render show how many covers a restaurant unit seats?

No. Asked for exactly 40 seats as ten tables of four in two rows of five, the render drew three rows of tables, with some of them partly hidden behind the columns, so the seat count cannot be read off the picture. Seat count comes from a layout drawn to scale and the occupant load your code official accepts.

Does a restaurant rendering show kitchen extraction?

No. Asked for an open kitchen with a wood-fired oven and a hood, the render drew a convincing stainless hood that rises into a box and stops at the ceiling. Where the exhaust duct goes after that, through the slab and up the building to the roof, is not in the picture, and in an existing building it is often the deciding question for the landlord.

Can I show the storefront and the sign too?

Yes. Start from a street photo of the same unit and ask for the fascia colour, the name letter for letter and what shows through the glass. All three names in our test came back spelled correctly, and halo-lit letters worked when we said the letter faces must stay dark. The landlord still has to approve the real sign.

Can I put these renders in an investor deck?

Yes on a paid plan: Hobby, Pro and Max include a commercial license with no watermark. Label them as concept renderings and put the empty photo next to them, so nobody reads a picture as a fit-out that has been priced or approved.

One Empty Unit, Three Directions

One photo of an empty unit was enough for a bistro, a cocktail bar and a counter spot, a night shot and three named storefronts, each in under 35 seconds, with the shopfront, columns and ceiling held. Seat counts didn't hold, and the kitchen extraction, fire limits, licence and cost were never in the picture, so the renders go to investors and the landlord next to the layout and the budget, not instead of them.


Try it on your empty unit. Upload the photo and tell Vizzy the concept and what must stay: try Visualizee free, no card.

Virtual Staging. On your own picture.

Visualizee is an AI virtual staging tool that furnishes a photo of an empty room. Upload the listing photo, name a style, and get furniture sized to the space with the walls, windows and floor kept.

Listing photo of an empty apartment living room with tall black steel-framed windows onto a tree-lined street, white walls and wide oak floorboards
The same room staged in warm Scandinavian style with a light grey sofa, a pale oak coffee table, a boucle armchair, a jute rug, a paper pendant, linen curtains and an olive tree
Drag to compare. Made with the Virtual Staging.

Sign in with Google, Apple or email. No credit card.

IndustriesPublished

  • Restaurant Renderings
  • Restaurant Concept
  • Restaurant Design
  • Bar Design
  • Hospitality Design
  • Commercial Real Estate

Put it to work on your project.

Bring a model screenshot, a sketch or a photo and tell Vizzy what to change, in plain words.

Free to try. Sign in with Google, Apple or email. No credit card.